Ultrasonic flaw detector Anyscan-30

Digital ultrasonic flaw detector Anyscan-30 is a portable industrial non-destructive flaw detector, which can quickly and easily, without damage, accurate to a variety of work piece defects (cracks, inclusions, cavity, etc) of the detection, location, assessment and diagnosis. Both can be used in laboratories and project site.

Leading technical target, abundant applied assistant function
Intelligible setting of keys and menu, easy to operate
400 MHz real-time hardware sampling, high-fidelity echo pulse
Broadband and amplifying circuit with low noise, selectable damping, excellent matching with low or high frequency probe
Excellent EMI design,good EMC performance
5.7?high resolution color LCD display

Technical data: 
Horizontal Linearity Error
≤0.1%
Vertical Linearity Error
≤3%
Surplus Sensitivity
≥62dB
Dynamic Range
≥40dB
Electronic Noise Level
≤20%
Far-field Resolution
≥30dB
working Mode
Single-probe or Dual-probes
Transmit Pulse
400V negative spikes
Operating Frequency Range
0.5MHz~20MHz, frequency subsection option, match probes well
Detection Range
0.5mm~9999mm ( steel; longitudinal wave), adjustable continuously, switchable steps
PRF
range≤125mm: 1KHz;
125mm<range≤1400mm: 250Hz;
1400mm<range≤9999mm: 40Hz
Sampling Rate
400MHz hardware real-time sampling
Velocity
1000m/s~15000m/s, adjustable continuously, switchable steps
Display Delay
-10mm~1000mm, adjustable continuously, switchable steps
Probe Delay
0μs~199.9μs
Damping
50Ω, 100Ω, 200Ω, 500Ω
Gain Adjustment
0dB~110dB, step by 0.0/0.1/0.5/1.0/2.0/6.0dB
Rectification Mode
Full wave / Positive half-wave / Negative half-wave / RF
Display Screen
5.7" high brightness TFT color LCD screen, 640×480 pixels
Measurement Mode
flank or peak
Store
store commonly-used detection parameters and test result data
Alarm
Hardware alarm, sound and light two methods, alarm models including positive mode, negative mode and DAC mode
Communication Interfaces
USB, Ethernet
Operating Temperature
-10~+50?
Battery
Lithium battery (10.8V 5200mAh), supplying power continuously for more than 6 hours
Power Supply
AC: 100-240V; DC: 15V/4A
Weight
about 1.4Kg (including battery)
Language
English, German, French, Spanish, Chinese
Waterproof Level
IP54 standards

Delivery:
Anyscan 30
Assessment procedures DAC 
Protective and carrying bag
Charging power supply / lithium-ion battery
1x probe 4 MHz 45 °
1x probe 4 MHz 60 °
1x probe 4 MHz 70 °
1x straight beam probe
1x probe cable Lemo 1 to Lemo 00
operation manual
Carrying case
Calibration certificate according to DIN EN 12668-1
USB stick