Prüfkoffer MT Sellect Größe XL

With special NDT filter. Highest residual light suppression, maximum UV transmission

Lightweight, handy UV LED hand lamp for battery or mains operation.

Technical data:

• Weight: 780 grams Including batteries 
• UV source 2 high-power UV LEDs
• White light 1 LED
• Lifetime UV LED >10000 hrs.
• Power supply:
• Battery continuous operation approx. 3-4 hours
• Risk class 2 according to DGZfP EM6 and BGFE
• UV-A intensity >40W/m² (distance 40 cm)

With special NDT filter Lightweight handheld UV LED hand lamp for battery or mains operation.

Technical data:

• Weight: 780 grams including batteries 
• UV source 2 high-power UV LEDs
• White light 1 LED
• Lifetime UV LED >10000 hrs.
• Power supply:
• 4 x 1.2 V 4,000 mAh NiMH continuous operation approx. 2- 2.5 hours
• Risk class 2 according to DGZfP EM6 and BGFE
• UV-A intensity > 100 W/m² (distance 40 cm)

Handy UV LED lamp with battery operation.

Housing aluminium
Weight incl. batteries 460g
Dimensions 160x85x100mm
Safety class DINEN60529IP64
UV LED service life > 10,000 hours
Battery life approx. 240 min
Working temperature 10-40°C
Waste heat < 40°C
LED 4 x 365 nm +/- 5 nm1 x white light for orientation
UV power >45W/m² Distance 380mmØ 200mm
Risk class 2 according to EM 6 and BGFE

Scope of delivery:
1 x US 711 NDT Master
4 x battery Li-Ion 3.7 V / 3400 mA
Charger for 2x Li-Ion battery (charging time 4 hours)
Measurement protocol
Transport case 400 x 300 x 130 mm

Light source: 2 UV-A LED + 1 White LED
Maximum UV-A intensity with filter at a distance of 38cm: 5000 μW /cm2 ± 5%

White Light Intensity: >3500 Lux
White light emission in UV mode: <10 lux
Wavelength (peak): 365 nm ± 5 nm
Power requirement: 100V - 240V, 50-60Hz
Battery runtime: 8-9 hours
Battery charging time: 2.5 hours
Housing material: Powder-coated aluminium
Housing dimensions (LxD): 220 x Ø 110
Approximate weight: 0.9 kg
Rated power: 4 watts
Protection class: IP63

The set contains:
LED UV lamp
Carrying strap
Battery charger with mains cable
Operating instructions and certificate of conformity
Soft carrying case

MR 90 UV-Yoker
UV module can be mounted on MR 50, power supply via integrated electronics Risk class 2 according to EM6,
UVA:
10 cm distance approx. 25 W/m2,
5 cm distance approx.70 W/m2

The test body is used to check and monitor the crack detection equipment during magnetic particle testing.
With certificate

Technical Specifikations:

Spectral Range:
UV-A Sensor: 240-370 nm Visible Sensor: 420-760 nm
Instrument Range:
UV-A (365 nm): 0-50 mW/cm2
Visible (555 nm): 0-80000 LUX (0- 7432fc)
Measuring Range:
UV-A (365 nm): 0-15 mW/cm2
Visible (555 nm): 0-5300 LUX (0- 500fc)
Accuracy:
±5% of reading
Display:
128 x 64 dot pixel TFT Display
Power requirement:
7.4V ,1000 mAh Li-ion rechargeable Battery
Operating Temperature:
+10°C to +50°C
Dimension:
Reader Unit(LxWxH):(146x85x25)mm Sensor Unit (LxWxH) :(69x50x20) mm
Weight:
300 gm (0.661 lbs.)

Kit Contains:
• Acumen 365 UV-A meter with integrated sensors
• DC Charger
• Certifcate Of Conformance
• Operating manual