Prüfkoffer MT Sellect Größe L

With special NDT filter. Highest residual light suppression, maximum UV transmission

Lightweight, handy UV LED hand lamp for battery or mains operation.

Technical data:

• Weight: 780 grams Including batteries 
• UV source 2 high-power UV LEDs
• White light 1 LED
• Lifetime UV LED >10000 hrs.
• Power supply:
• Battery continuous operation approx. 3-4 hours
• Risk class 2 according to DGZfP EM6 and BGFE
• UV-A intensity >40W/m² (distance 40 cm)

With special NDT filter Lightweight handheld UV LED hand lamp for battery or mains operation.

Technical data:

• Weight: 780 grams including batteries 
• UV source 2 high-power UV LEDs
• White light 1 LED
• Lifetime UV LED >10000 hrs.
• Power supply:
• 4 x 1.2 V 4,000 mAh NiMH continuous operation approx. 2- 2.5 hours
• Risk class 2 according to DGZfP EM6 and BGFE
• UV-A intensity > 100 W/m² (distance 40 cm)

Handy UV LED lamp with battery operation.

Housing aluminium
Weight incl. batteries 460g
Dimensions 160x85x100mm
Safety class DINEN60529IP64
UV LED service life > 10,000 hours
Battery life approx. 240 min
Working temperature 10-40°C
Waste heat < 40°C
LED 4 x 365 nm +/- 5 nm1 x white light for orientation
UV power >45W/m² Distance 380mmØ 200mm
Risk class 2 according to EM 6 and BGFE

Scope of delivery:
1 x US 711 NDT Master
4 x battery Li-Ion 3.7 V / 3400 mA
Charger for 2x Li-Ion battery (charging time 4 hours)
Measurement protocol
Transport case 400 x 300 x 130 mm

Light source: 2 UV-A LED + 1 White LED
Maximum UV-A intensity with filter at a distance of 38cm: 5000 μW /cm2 ± 5%

White Light Intensity: >3500 Lux
White light emission in UV mode: <10 lux
Wavelength (peak): 365 nm ± 5 nm
Power requirement: 100V - 240V, 50-60Hz
Battery runtime: 8-9 hours
Battery charging time: 2.5 hours
Housing material: Powder-coated aluminium
Housing dimensions (LxD): 220 x Ø 110
Approximate weight: 0.9 kg
Rated power: 4 watts
Protection class: IP63

The set contains:
LED UV lamp
Carrying strap
Battery charger with mains cable
Operating instructions and certificate of conformity
Soft carrying case

The test body is used to check and monitor the crack detection equipment during magnetic particle testing.
With certificate