MT-Prüfkoffer M für die Magnetpulverprüfung

Jochmagnete / Handmagnete

Please select only one component.

MR 50 Hand yoke 230V +765,00 €: Stout and impact proof housing
No power loss because of the
optimized fitting of the poles
Poles protected against penetration of test media
Ergonomical handle
Low maintenance
light

230 Volt, with adjustable poles, with mounted cable connection, 2 coils, made in Germany

Item details

Quantity: 1

230V AC-Hand yoke 620 +555,00 €: Light, handy AC handheld magnet with high performance.
Easier work due to small dimensions and weight.

With movable attachment poles, 230 V, 2 coils and detachable cable.
Weight: 2,4 kg
Dimensions: L230xD45xH130 mm
Lift: > 6 kg

Item details

Quantity: 1

MR 56 Hand yoke 230V +855,00 €: Stout and impact proof housing
No power loss because of the
optimized fitting of the poles
Poles protected against penetration of test media
Ergonomical handle
Powerful
Low maintenance

230 Volt, with straight poles, with mounted cable connection, 2 coils, made in Germany

Item details

Quantity: 1

Yoke magnet AY-7A +550,00 €

Technical Specifcation:

Electrical Requirement:
230 Volt - 50 Hz: 2.6 Amp
Waveform:
AC (Single Phase)
Tangential Field Strength:
2 KA/m RMS at center
Lifting Force:
4.5Kg/10lbs
Duty Cycle:
50% (Max5 sec on/5sec off)
Yoke Weight:
2 Kg / 4.41lbs
Leg Span:
2.5-10.2 in / 65-260 mm
Pole Contact:
20 x 20mm
Power Cord Length:
3 Meter/10ft.

Kit Contains

AC Yoke
Power Cord
Operation Manual
Certifcate of Conformance

Item details

Quantity: 1

Vorsatzpole für Jochmagnete

optional

Articulation piece for MR 56 +275,00 €: 1 set = 2 pieces
(Art.-No. 56-1)

Item details

Quantity: 1

Pol 45° für Handmagnet MR 56 +275,00 €: Item details

Quantity: 1

UV-Lampen

Please select only one component.

UV-LED GAZ 200 Professional +975,00 €

With special NDT filter. Highest residual light suppression, maximum UV transmission

Lightweight, handy UV LED hand lamp for battery or mains operation.

Technical data:

Weight: 780 grams Including batteries
UV source 2 high-power UV LEDs
White light 1 LED
Lifetime UV LED >10000 hrs.
Power supply:
Battery continuous operation approx. 3-4 hours
Risk class 2 according to DGZfP EM6 and BGFE
UV-A intensity >40W/m² (distance 40 cm)

Item details

Quantity: 1

UV-LED GAZ 200s Professional +1.025,00 €

With special NDT filter Lightweight handheld UV LED hand lamp for battery or mains operation.

Technical data:

Weight: 780 grams including batteries
UV source 2 high-power UV LEDs
White light 1 LED
Lifetime UV LED >10000 hrs.
Power supply:
4 x 1.2 V 4,000 mAh NiMH continuous operation approx. 2- 2.5 hours
Risk class 2 according to DGZfP EM6 and BGFE
UV-A intensity > 100 W/m² (distance 40 cm)

Item details

Quantity: 1

US 711 NDT Master +1.150,00 €: Handy UV LED lamp with battery operation.

Housing aluminium
Weight incl. batteries 460g
Dimensions 160x85x100mm
Safety class DINEN60529IP64
UV LED service life > 10,000 hours
Battery life approx. 240 min
Working temperature 10-40°C
Waste heat < 40°C
LED 4 x 365 nm +/- 5 nm1 x white light for orientation
UV power >45W/m² Distance 380mmØ 200mm
Risk class 2 according to EM 6 and BGFE

Scope of delivery:
1 x US 711 NDT Master
4 x battery Li-Ion 3.7 V / 3400 mA
Charger for 2x Li-Ion battery (charging time 4 hours)
Measurement protocol
Transport case 400 x 300 x 130 mm

Item details

Quantity: 1

2 UV-A-LED + 1 withLED-Internal Battery +945,00 €: Light source: 2 UV-A LED + 1 White LED
Maximum UV-A intensity with filter at a distance of 38cm: 5000 μW /cm2 ± 5%

White Light Intensity: >3500 Lux
White light emission in UV mode: <10 lux
Wavelength (peak): 365 nm ± 5 nm
Power requirement: 100V - 240V, 50-60Hz
Battery runtime: 8-9 hours
Battery charging time: 2.5 hours
Housing material: Powder-coated aluminium
Housing dimensions (LxD): 220 x Ø 110
Approximate weight: 0.9 kg
Rated power: 4 watts
Protection class: IP63

The set contains:
LED UV lamp
Carrying strap
Battery charger with mains cable
Operating instructions and certificate of conformity
Soft carrying case

Item details

Quantity: 1

Check Bag MT1

optional

Check Bag MT1 +47,00 €: The compact bag contains the following items:

6 cans MR 76F 500 ml
Magnetic powder fluid spray fluorescent, ready to use for magnetic powder testing according to DIN EN ISO 9934 part 1

MR76 F Magnetic Powder Fluid fluorescent is used to detect the finest cracks when testing magnetic powder under UV light.

Average particle size of the magnetic powder: da = 3-4 μm

Item details

Quantity: 1

Check Bag MT1 +47,00 €: The compact bag contains the following items:

6 cans MR 76F 500 ml
Magnetic powder fluid spray fluorescent, ready to use for magnetic powder testing according to DIN EN ISO 9934 part 1

MR76 F Magnetic Powder Fluid fluorescent is used to detect the finest cracks when testing magnetic powder under UV light.

Average particle size of the magnetic powder: da = 3-4 μm

Item details

Quantity: 1

Prüfkoffer MT Sellect Größe M